Claas Axion 800 CEBIS wheel tractor


























≈ SGD 102,000
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts

- year of manufacture – 2019,
- FPT engine – 205 HP,
- 6 cylinder engine,
- engine hours – 5323 hr,
- CEBIS – on-board information system (ISOBUS),
- CSM – headland management,
- HEXASHIFT – transmission – 24/24 (50 km/h),
- HEXACTIV – automatically gear change,
- REVERSHIFT – hydraulic reverser, (Park Lock),
- PROACTIV – front axle suspension,
- AUTO PILOT – guidance system,
- GPS PILOT ready,
- 4-point cab suspension,
- drive’s seat, pneumatic suspension, swivel,
- radar sensor (slip measurement),
- front linkage,
- PTO – 540 ECO + 1000/1000 ECO rpm,
- EHR – electrohydraulic rear linkage,
- trailer air-brakes system, (2 lines),
- hydraulic brake for trailers,
- Load-Sensing hydraulic system – 110 l/min, 200 bar,
- Power Beyond hydraulic system,
- automatic air-condition,
- radio MP3/USB/AUX/SD,
- work lights,
- trailer coupling, automatic, pin D38 mm,
- bumper hitch,
- bumper hitch, pin D41 mm,
- mechanical top-link, cat. 3 – front,
- mechanical top-link, cat. 3 – rear,
- front tyres – Mitas 540/65 R30,
- rear tyres – Mitas 650/65 R42,
- very good condition
If you have any questions, please don't hesitate to contact us.
Contact person: Dawid show contacts,
show contacts
We offer also worldwide shipping.
Part exchange possible.
- Baujahr – 2019,
- FPT Motor – 205 PS,
- 6 – Zylinder Motor,
- Betriebsstunden – 5323 Std.,
- CEBIS – Bord-Informationssystems (ISOBUS),
- CSM – Vorgewendemanagement,
- HEXASHIFT – Getriebe – 24/24 (40 km/h),
- HEXACTIV – automatisch schalten,
- REVERSHIFT – hydraulische Wendeschaltung, (Park Lock),
- PROACTIV – gefederte Vorderachse,
- AUTO PILOT - Lenksystem,
- GPS PILOT Vorbereitung,
- 4-Punkt-Kabinenfederung,
- Fahrersitz, pneumatisch gefedert, schwenkbar,
- Radarsensor (Schlupfmessung),
- Frontkraftheber,
- Zapfwelle – 540 ECO + 1000/1000 ECO U/min,
- EHR – Elektrohydraulischer Kraftheber,
- Druckluftbremsanlage, (2-Kreis),
- hydraulische Bremse für Anhänger,
- Load-Sensing Hydraulik System – 110 l/min, 200 bar,
- Power Beyond Hydraulik System,
- Klimaautomatik,
- Radio MP3/USB/AUX/SD,
- Arbeitsbeleuchtung,
- Anhängekupplung, automatisch, bolzen D38 mm,
- Zugpendel, hitch,
- Zugpendel, bolzen D41 mm,
- Oberlenker, mechanisch Kat. 3 – vorne,
- Oberlenker, mechanisch Kat. 3 – hinten,
- Bereifung vorne – Mitas 540/65 R30,
- Bereifung hinten – Mitas 650/65 R42,
- Sehr gute Zustand
Bei Fragen stehen Wir gerne zu Verfugnung.
Kontaktperson: Dawid show contacts,
show contacts
Wir bieten auch Weltweit Transport an.
Können wir auch Ihren Gebrauchtemaschinen in Zahlung nehmen.
- rok produkcji – 2019,
- silnik FPT – 205 KM,
- 6-cio cylindrowy silnik,
- godziny silnika – 5323 mth,
- CEBIS – komputer pokładowy, (ISOBUS),
- CSM – zarządzanie narzędziem na uwrociach,
- HEXASHIFT – przekładnia – 24/24 (50 km/h),
- HEXACTIV – automatyka zmiany przełożeń,
- REVERSHIFT – elektrohydrauliczny rewers, (Park Lock),
- PROACTIV – amortyzowana przednia oś,
- AUTO PILOT – automatyka osi kierującej,
- przygotowany pod GPS PILOT,
- czteropunktowa amortyzacja kabiny,
- fotel operatora z amortyzacją pneumatyczną, obrotowy,
- radar poślizgu,
- przedni TUZ,
- WOM – 540 ECO + 1000/1000 ECO obr/ min.,
- EHR – elektrohydrauliczne sterowanie podnośnikiem,
- instalacja hamulców pneumatycznych, (2-obwodowa),
- hamulec hydrauliczny na przyczepy,
- układ hydrauliczny Load-Sensing – 110 l/min, 200 bar,
- układ hydrauliczny Power Beyond,
- klimatyzacja automatyczna,
- radio MP3/USB/AUX/SD,
- oświetlenie robocze,
- zaczep przyczepy, automatyczny – sworzeń D38 mm,
- zaczep Hitch,
- zaczep belka polowa - sworzeń D41 mm,
- cięgno mechaniczne – kat. 3 – przód,
- cięgno mechaniczne – kat. 3 – tył,
- opony przód – Mitas 540/65 R30,
- opony tył – Mitas 650/65 R42,
- stan bardzo dobry
Przyjmujemy maszyny w rozliczeniu.
Oferujemy także transport ponadgabarytowy, koszty transportu ustalane są indywidualnie.
Treść niniejszego ogłoszenia nie stanowi oferty handlowej w rozumieniu art. 66 §1 Kodeksu Cywilnego oraz innych właściwych przepisów prawnych.
Kontakt:
Biuro: show contacts
Dawid Kowalski show contacts
show contacts